Guidance on Measurement Quantity Id in Meter Technical Details Market Messages

Published on 16 Oct 2025 00:00 by Jenny Hyskaj

Following implementation of the new MHHS Code requirements at Programme Milestone 8 (M8) on 22 September 2025, some parties have queried that the valid data enumerations set within the J0103 (DI50056) – Measurement Quantity Id data item does not include all appropriate values. This has been highlighted specifically for where this data item is sent within Meter Technical Details (MTD) Market Messages, and in particular Half Hourly / Advanced MTDs (D0268). 

For the implementation of the MHHS design into Codes, the pre-existing J0103 and the associated new MHHS data item DI-052 (Measurement Quantity Id) have been linked in the Energy Market Data Specification (EMDS). The MHHS design artefacts stipulated that four valid data enumerations were appropriate for the DI-052 and these are the data enumerations that have been used for linked J0103/DI-052 (Measurement Quantity Id): 

  • AI – Active Import,  
  • AE – Active Export 
  • RI – Reactive Import  
  • RE – Reactive Export 

Prior to M8, the validation criteria for populating the J0103 referred to the valid set within the BSC Market Domain Data (MDD) - no enumerations were stipulated within EMDS or the Data Transfer Catalogue (DTC). The Measurement Quantity Id (entity 47) has transitioned from MDD to the new Industry Standing Data (ISD), however ISD states that this entity should only be used for the purposes of informing Load Shapes, and that the valid set for MTD flows should be attained through J0103 valid sets within the EMDS/DTC.  

As a consequence of the linking of the J0103 and the DI-052, one value (UN – Unassigned) used within MTD flows, and previously captured in MDD, is missing from the J0103 valid set that has been captured from the MHHS design in the EMDS.  

Presently, parties who are using any Electralink Flow Builder systems to send flows, cannot include the necessary enumerations. Likewise, parties using Gatekeeper validation to validate flows sent or received against the DTC may find flows containing the ‘UN’ enumeration are classed as invalid and are prevented from being sent / received. 

The REC Code Manager and the BSC (as the J0103 data item owner) are working together to resolve the issue which is impacting the ability of parties to complete processes governed under the REC. A change to the BSC will be required to update the J0103 valid set, however until this change can be implemented an interim workaround is required.  

Following discussions with industry at the REC Metering Expert Panel (RECMEP) and the REC Issues Group (RIG), the REC Code Manager is recommending to Industry parties who send or receive the J0103 – Measurement Quantity Id data item that they review their Gatekeeper validation set-up and undertake appropriate activity to relax the validation undertaken to ensure that these messages are received and can be processed. Risk assessment on any relaxation is the responsibility of individual Parties. This will provide a temporary workaround to avoid an ongoing downstream impact to operational procedures.  

In particular, this guidance should be noted by the following market participants: 

  • Legacy - Half Hourly Meter Operator Agents, Half Hourly Data Collectors and Suppliers of Half Hourly Metering Points.  
  • Those operating in MHHS arrangements - Advanced Meter Operator Agents, Advanced Data Services and Suppliers of Advanced Metering Points.